S61N飞机大气数据测试仪适配器
S61N飞机大气数据测试仪适配器：
AIR DATA ACCESSORIES KIT MODEL No. ADAS61N-612 S61N HELICOPTER
The kit contains the equipment required to test from source the complete pitot & static air data system on the S61N helicopter, as well as the means of pre-testing all adaptors and hoses prior to being fitted to the aircraft.
Pitot Static Test Adaptor
Part No. PS47741M-3-4 (2 req’d.)
These units fit the pitot static probes located on the nose and when installed they will isolate and test each system separately or simultaneously.
Pre-Test Probe
Part No. PT14774 (2 req’d.)
When this unit is inserted into the adaptor and the extension hose is connected from the pneumatic generator, the complete system, ester, hoses and adaptors can be tested before fitting to the aircraft.
Pitot Test Hose Assembly
Part No. S61N-7270 (1 req’d.)
This hose is connected to each pitot inlet of the adaptors and is fitted with double acting quick disconnects for use when it is desirable to test only one pitot system. The extension hose to the pneumatic generator is included on this assembly.
Static Test Hose Assembly
Part No. S61N-5160 (1 req’d.)
This assembly attaches to the static fittings. The double acting quick disconnects operate in the same manner as that on the pitot test hose assembly. The extension hose to the pneumatic generator is included on this assembly.
Lubricating Fluid
Part No. LF5050
This fluid is used to lubricate the glands of the pitot static test adaptors. It is recommendedthat a small amount be placed on the glands before installing adaptor on pitot head. This will ensure smooth installation onto the pitot probe.
Seal Kit - Part No. SK741M
Two sets of spare seals are stowed in the case.
Manual - Part No. 444-S61N-612
One manual is supplied with each kit.The equipment is enclosed in a case assembly - Model N
如果您需要用于连接大气数据测试仪与飞机皮托管和静压口的设备，需要选型号或是需要技术交流，请联系我们专业工作人员吧！
| Aircraft Type | Pitot Test Adaptor | Pitot Probe Part No. | Static Test Adaptor Blanking Adaptor | Miscellaneous Adaptor | Pitot Pre-Test & Assembly Integrity Fixture | Air Data Accessories Kit |
|---|---|---|---|---|---|---|
| S61N | PS47741M-3-4 | PT14774 | ADAS61N-612 ADAS61N-723 |
| Aircraft | S61N |
|---|---|
| Air Data Accessories Kit | ADAS61N-612 ADAS61N-723 |
| Category | Other Helicopter |
| Lubricating Fluid | LF5050 |
| Pitot Pre-Test & Assembly Integrity Fixture | PT14774 |
| Pitot Test Adaptor | PS47741M-3-4 |
| 飞机 | S61N |
|---|---|
| Air Data 附件套件 | ADAS61N-612 ADAS61N-723 |
| 类别 | 其他直升机 |
| 润滑液 | LF5050系列 |
| Pitot预测试和装配完整性夹具 | PT14774 |
| 皮托管测试适配器 | PS47741M-3-4 |
AIR DATA ACCESSORIES KIT MODEL No. ADAS61N-612 S61N HELICOPTER
The kit contains the equipment required to test from source the complete pitot & static air data system on the S61N helicopter, as well as the means of pre-testing all adaptors and hoses prior to being fitted to the aircraft.
Part No. PS47741M-3-4 (2 req’d.)
These units fit the pitot static probes located on the nose and when installed they will isolate and test each system separately or simultaneously.
Pre-Test Probe
Part No. PT14774 (2 req’d.)
When this unit is inserted into the adaptor and the extension hose is connected from the pneumatic generator, the complete system, ester, hoses and adaptors can be tested before fitting to the aircraft.
Pitot Test Hose Assembly
Part No. S61N-7270 (1 req’d.)
This hose is connected to each pitot inlet of the adaptors and is fitted with double acting quick disconnects for use when it is desirable to test only one pitot system. The extension hose to the pneumatic generator is included on this assembly.
Static Test Hose Assembly
Part No. S61N-5160 (1 req’d.)
This assembly attaches to the static fittings. The double acting quick disconnects operate in the same manner as that on the pitot test hose assembly. The extension hose to the pneumatic generator is included on this assembly.
Part No. LF5050
This fluid is used to lubricate the glands of the pitot static test adaptors. It is recommendedthat a small amount be placed on the glands before installing adaptor on pitot head. This will ensure smooth installation onto the pitot probe.
Seal Kit - Part No. SK741M
Two sets of spare seals are stowed in the case.
Manual - Part No. 444-S61N-612
One manual is supplied with each kit.The equipment is enclosed in a case assembly - Model N
如果您需要用于连接大气数据测试仪与飞机皮托管和静压口的设备，需要选型号或是需要技术交流，请联系我们专业工作人员吧！
