S-76飞机皮托管测试适配器
皮托管测试适配器是用于连接大气数据测试仪与飞机皮托管和静压口的设备，它确保在测试过程中连接无泄漏，从而验证皮托管、软管及大气数据系统的完整性。适配器有多种类型和配置，适用于不同型号的飞机。安装和拆卸适配器通常简单易行，无需特殊工具，且适配器设计有自我测试功能，确保测试的准确性和安全性。
| Aircraft Type | Pitot Test Adaptor | Pitot Probe Part No. | Static Test Adaptor Blanking Adaptor | Miscellaneous Adaptor | Pitot Pre-Test & Assembly Integrity Fixture | Air Data Accessories Kit |
|---|---|---|---|---|---|---|
| S-76 | PSS50902-3-4-4 | 856LK1 |
50891M-4 50891BM1* |
421-3437 | S76-612 |
| Aircraft | S-76 |
|---|---|
| Air Data Accessories Kit | S76-612 |
| Category | Other Helicopter |
| Lubricating Fluid | LF5050 |
| Pitot Pre-Test & Assembly Integrity Fixture | 421-3437 |
| Pitot Test Adaptor | PSS50902-3-4-4 |
| Seal and Spacer Kit | SSK902 |
| Seal Kit | SK902 |
| Static Test Adaptor / Blanking Adaptor |
50891M-4 50891BM1* |
| 飞机 | S-76 |
|---|---|
| Air Data 附件套件 | j件号S76-612 |
| 类别 | 其他直升机 |
| 润滑液 | LF5050系列 |
| Pitot预测试和装配完整性夹具 | 421-3437 |
| 皮托管测试适配器 | PSS50902-3-4-4 |
| 密封件和垫片套件 | SSK902型 |
| 密封套件 | SK902系列 |
| 静态测试适配器 / 消隐适配器 |
50891M-4 50891BM1* |
AIR DATA ACCESSORIES KIT MODEL No. S76-612 S-76 HELICOPTER - Proprietary Information -
The kit contains all the equipment required to test from source the complete pitot and static air data system on the S-76 helicopter, as well as he means of pre-testing all adaptors and hoses prior to being fitted to the helicopter.Pitot & Dual Static Test Adaptor
Part No. PSS50902-3-4-4 (2 req’d.)
These units fit the pitot static probes located on the nose and when installed they will isolate and test each system separately or simultaneously.
Pre-Test Probe
Part No. 421-3437 (1 req’d.)
When it becomes necessary to test the integrity of the pitot & dual static adaptors and/or hoses, this unit is used in place of the pitot & ual static probe.
Static Test Adaptor
Part No. 50891M-4 (1 req’d.)
This unit is used to test the static systems controlled by the static vents located on each side of the rear fuselage and being cross connected internally. There are two pairs of these static vents. P.S. Be sure to connect the hose to the adaptor before attachment to static vent.
Static Blanking Adaptor
Part No. 50891BM1 (1 req’d)
This adaptor is used to blank off the matching static vent on the port side.
Pitot Test Hose Assembly
Part No. S76-7270 (1 req’d.)
This hose is connected to each pitot inlet of the adaptors, and is fitted with double acting quick disconnects for use when it is desirable to test only one pitot system. The connection to the pitot outlet of the pneumatic generator is included on this assembly.
Static Test Hose Assembly
Part No. S76-5160 (1 req’d.)
This assembly attaches to the No.1 and No.2 static positions on the adaptor. The double acting quick disconnects operate in the same manner as that on the pitot test hose assembly. The extension hose then connects to the static outlet of the pneumatic generator.
Lubricating Fluid
Part No. LF5050 (1 req’d.)
This fluid us used to lubricate the glands of the pitot & dual static adaptors. It is recommended that a small amount be placed on the glands before installing adaptors on pitot head. This will ensure smooth installation onto the pitot probe.
Manual
Part No. 444-S76
One manual is supplied with each kit.
The equipment is enclosed in a case assembly.
如果您需要用于连接大气数据测试仪与飞机皮托管和静压口的设备，需要选型号或是需要技术交流，请联系我们专业工作人员吧！
