S-76D/S-92飞机皮托管夹具
S-76D/S-92飞机皮托管夹具：
Pitot Static Test Adaptor
Part No. PSSS90453-3-4-4-4 (2 req’d.)
These units fit pitot probes P/N 0856TU and when installed will isolate each system.
Pre-Test Probe
Part No. PT421-453 (2 req’d.)
When it becomes necessary to test the integrity of the pitot static adaptors and/or hoses and test set, these units are installed into the pitot adaptors thus simulating the pitot head.
Pitot Test Adaptor (Standby)
Part No. P65508-3 (1 req’d.)
This unit fits the pitot probe P/N 0851JN and is used to test the standby pitot system on the S-92 helicopter.
Pre-Test Probe
Part No. PT421-508 (1 req’d.)
When it becomes necessary to test the integrity of the pitot adaptor and/or hoses and test set, this unit is installed into the pitot adaptor thus simulating the pitot head.
Pitot Test Hose Assembly
Part No. S92-7270 (1 req’d.)
This hose is connected to each pitot inlet of the adaptors and is fitted with double acting quick disconnects for use when it is desirable to test only one pitot system. The connection for the pitot outlet of the pneumatic generator is included on this assembly.
Static Test Hose Assembly
Part No. S92-5160 (1 req’d.)
This assembly attaches to the static positions on adaptor P/N PSSS90453-3-4-4-4. The double acting quick disconnects operate in the same manner as those on the pitot test hose assembly.
Lubricating Fluid
Part No. LF5050 (1 req’d.)
This fluid is used to lubricate the glands of the adaptors. It is recommended that a small amount be placed on the glands before installing adaptor on pitot head. This will ensure smooth installation onto the pitot probe.
Seal Kit- Part No. SK0453 (2 req’d.)
Two sets of spare seals for adaptor - P/N PSSS90453-3-4-4-4 are supplied with each kit.
Seal Kit - Part No. SK5508 (1 req’d.)
One set of spare seals for adaptor - P/N P65508-3 are supplied with each kit.
Manual Part No. 444-S92-723
One manual is supplied with each kit. The equipment is enclosed in case assembly Model No. 106XD-S92.
我司有售各种飞机组合大气数据测试仪适配器，欢迎技术交流。
| Aircraft Type | Pitot Test Adaptor | Pitot Probe Part No. | Static Test Adaptor Blanking Adaptor | Miscellaneous Adaptor | Pitot Pre-Test & Assembly Integrity Fixture | Air Data Accessories Kit |
|---|---|---|---|---|---|---|
| S-76D S-92 | PSSS90453-3-4-4-4 |
0856TU 0851JN |
Alternate P65508-3 | PT421-453 PT421-508 | S92-723 |
| Aircraft | S-76D / S-92 |
|---|---|
| Air Data Accessories Kit | S92-723 |
| Category | Other Helicopter |
| Lubricating Fluid | LF5050 |
| Miscellaneous Adaptor | Alternate P65508-3 |
| Pitot Pre-Test & Assembly Integrity Fixture | PT421-453 PT421-508 |
| Pitot Test Adaptor | PSSS90453-3-4-4-4 |
| 飞机 | S-76D / S-92 |
|---|---|
| Air Data 附件套件 | 件号S92-723 |
| 类别 | 其他直升机 |
| 润滑液 | LF5050系列 |
| 其他适配器 | 备用P65508-3 |
| Pitot预测试和装配完整性夹具 | PT421-453 PT421-508 |
| 皮托管测试适配器 | PSSS90453-3-4-4-4 |
AIR DATA ACCESSORIES KIT MODEL No. S92-723 S-92 HELICOPTER - Proprietary Information -
This kit contains all the equipment required to test from source the complete pitot & static air data system on the S-92 helicopter, as well as the means of pre- testing all adaptors and hoses prior to being fitted to the aircraft.
This kit contains all the equipment required to test from source the complete pitot & static air data system on the S-92 helicopter, as well as the means of pre- testing all adaptors and hoses prior to being fitted to the aircraft.
Pitot Static Test Adaptor
Part No. PSSS90453-3-4-4-4 (2 req’d.)
These units fit pitot probes P/N 0856TU and when installed will isolate each system.
Pre-Test Probe
Part No. PT421-453 (2 req’d.)
When it becomes necessary to test the integrity of the pitot static adaptors and/or hoses and test set, these units are installed into the pitot adaptors thus simulating the pitot head.
Pitot Test Adaptor (Standby)
Part No. P65508-3 (1 req’d.)
This unit fits the pitot probe P/N 0851JN and is used to test the standby pitot system on the S-92 helicopter.
Pre-Test Probe
Part No. PT421-508 (1 req’d.)
When it becomes necessary to test the integrity of the pitot adaptor and/or hoses and test set, this unit is installed into the pitot adaptor thus simulating the pitot head.
Pitot Test Hose Assembly
Part No. S92-7270 (1 req’d.)
This hose is connected to each pitot inlet of the adaptors and is fitted with double acting quick disconnects for use when it is desirable to test only one pitot system. The connection for the pitot outlet of the pneumatic generator is included on this assembly.
Static Test Hose Assembly
Part No. S92-5160 (1 req’d.)
This assembly attaches to the static positions on adaptor P/N PSSS90453-3-4-4-4. The double acting quick disconnects operate in the same manner as those on the pitot test hose assembly.
Lubricating Fluid
Part No. LF5050 (1 req’d.)
This fluid is used to lubricate the glands of the adaptors. It is recommended that a small amount be placed on the glands before installing adaptor on pitot head. This will ensure smooth installation onto the pitot probe.
Seal Kit- Part No. SK0453 (2 req’d.)
Two sets of spare seals for adaptor - P/N PSSS90453-3-4-4-4 are supplied with each kit.
Seal Kit - Part No. SK5508 (1 req’d.)
One set of spare seals for adaptor - P/N P65508-3 are supplied with each kit.
Manual Part No. 444-S92-723
One manual is supplied with each kit. The equipment is enclosed in case assembly Model No. 106XD-S92.
我司有售各种飞机组合大气数据测试仪适配器，欢迎技术交流。
