HH-65飞机皮托管测试适配器
皮托管测试适配器是用于连接大气数据测试仪与飞机皮托管和静压口的设备，它确保在测试过程中连接无泄漏，从而验证皮托管、软管及大气数据系统的完整性。适配器有多种类型和配置，适用于不同型号的飞机。安装和拆卸适配器通常简单易行，无需特殊工具，且适配器设计有自我测试功能，确保测试的准确性和安全性。
AIR DATA ACCESSORIES KIT MODEL No. EC365-565-723 - Proprietary Information -
This kit contains all the equipment required to test the complete pitot and static system on the helicopter. The kit also allows pre-testing for a “No leak” configuration of all test adaptors, hoses and air data test set prior to connecting to the helicopter.
Pitot Test Adaptor
Part No. P88494-3 (2 req’d.)
This test adaptor fits the pitot probe and is to be connected to the air data test set via the supplied hose assembly.
Pre-Test Probe
Part No. PT421-494 (2 req’d.)
This probe is for use when it is necessary to check the integrity of the pitot test adaptor seals, or trouble shooting for air leaks. This unit simulates the pitot probe.
Static Test Adaptor
Part No. SKAX30MM-4-4-4(2 req’d.)
These units fit the static vents located on the fuselage of the helicopter. One of the static test adaptors is used to blank off the matching static port on the opposite side of the helicopter fuselage. For this, the protective caps are tightened.
Pitot Test Hose Assembly
Part No. EC365-9492 (1 req’d.)
This hose is connected to the fittings of the pitot test adaptors and to the pitot outlet of the air data test set.
Static Test Hose Assembly
Part No. EC365-4291 (1 req’d.)
This assembly attaches to the static test adaptor P/N SKAX30MM-4-4-4 which is installed on the static ports. The other end of the hose is connected to the static outlet of the air data test set.
Lubricating Fluid
Part No. LF5050 (1 req'd.)
This fluid is used to lubricate the glands of the pitot adaptors. It is recommended that a small amount be placed on the glands before installing adaptor on pitot head. This will ensure smooth installation onto the pitot probe.
Seal Kit - Part No. SK494 (2 req'd.)
Two sets of spare seals for the pitot test adaptors are stowed in the case.
Seal Part - Part No. 521-7MCS (3 req'd.)
Three spare seals for the Static test adaptors are stowed in the case.
Manual - Part No. 444-EC365-723
One manual is supplied with each kit.
The equipment is enclosed in a case assembly.
文章来源于HH-65飞机皮托管测试适配器
| Aircraft Type | Pitot Test Adaptor | Pitot Probe Part No. | Static Test Adaptor Blanking Adaptor | Miscellaneous Adaptor | Pitot Pre-Test & Assembly Integrity Fixture | Air Data Accessories Kit |
|---|---|---|---|---|---|---|
| HH 65 | P88494-3 | 46380-1 | SKAX30MM-4-4-4 | EC365-565-723 |
| Aircraft | HH 65 |
|---|---|
| Air Data Accessories Kit | EC365-565-723 |
| Category | Airbus Helicopter |
| Lubricating Fluid | LF5050 |
| Pitot Test Adaptor | P88494-3 |
| Seal and Spacer Kit | SSK494 |
| Seal Kit | SK494 |
| Static Test Adaptor / Blanking Adaptor | SKAX30MM-4-4-4 |
| 飞机 | HH 65 |
|---|---|
| Air Data 附件套件 | 件号 EC365-565-723 |
| 类别 | 空中客车直升机 |
| 润滑液 | LF5050系列 |
| 皮托管测试适配器 | 货号P88494-3 |
| 密封件和垫片套件 | SSK494型 |
| 密封套件 | SK494系列 |
| 静态测试适配器 / 消隐适配器 | SKAX30MM-4-4-4 |
AIR DATA ACCESSORIES KIT MODEL No. EC365-565-723 - Proprietary Information -
This kit contains all the equipment required to test the complete pitot and static system on the helicopter. The kit also allows pre-testing for a “No leak” configuration of all test adaptors, hoses and air data test set prior to connecting to the helicopter.
Pitot Test Adaptor
Part No. P88494-3 (2 req’d.)
This test adaptor fits the pitot probe and is to be connected to the air data test set via the supplied hose assembly.
Pre-Test Probe
Part No. PT421-494 (2 req’d.)
This probe is for use when it is necessary to check the integrity of the pitot test adaptor seals, or trouble shooting for air leaks. This unit simulates the pitot probe.
Static Test Adaptor
Part No. SKAX30MM-4-4-4(2 req’d.)
These units fit the static vents located on the fuselage of the helicopter. One of the static test adaptors is used to blank off the matching static port on the opposite side of the helicopter fuselage. For this, the protective caps are tightened.
Pitot Test Hose Assembly
Part No. EC365-9492 (1 req’d.)
This hose is connected to the fittings of the pitot test adaptors and to the pitot outlet of the air data test set.
Static Test Hose Assembly
Part No. EC365-4291 (1 req’d.)
This assembly attaches to the static test adaptor P/N SKAX30MM-4-4-4 which is installed on the static ports. The other end of the hose is connected to the static outlet of the air data test set.
Lubricating Fluid
Part No. LF5050 (1 req'd.)
This fluid is used to lubricate the glands of the pitot adaptors. It is recommended that a small amount be placed on the glands before installing adaptor on pitot head. This will ensure smooth installation onto the pitot probe.
Seal Kit - Part No. SK494 (2 req'd.)
Two sets of spare seals for the pitot test adaptors are stowed in the case.
Seal Part - Part No. 521-7MCS (3 req'd.)
Three spare seals for the Static test adaptors are stowed in the case.
Manual - Part No. 444-EC365-723
One manual is supplied with each kit.
The equipment is enclosed in a case assembly.
文章来源于HH-65飞机皮托管测试适配器
