DUSPOL-EXPERT1000电压测试仪
DUSPOLEXPERT1000电压测试仪 带有橡胶手柄的坚固外壳设计，适用于电气工程、工业、维护和服务或者故障排除。带有可显示的LED，不同颜色的LED灯代表着不同的测量值。可以显示出12、24、50、120、230、400、690和1000V AC/DC的电平，可测量高达100KO的光导通测试 ，光导通测试是通过黄色的LED显示；相序测试的值会通绿色LED显示出来；相位测试的值会通过红色LED显示出来，测量点照明是白色 的LED灯；极性测试值也会通过其他色的LED显示；通过按钮切换负载 IS=550......
产品描述
DUSPOL–EXPERT1000电压测试仪带有橡胶手柄的坚固外壳设计，适用于电气工程、工业、维护和服务或者故障排除。带有可显示的LED，不同颜色的LED灯代表着不同的测量值。可以显示出12、24、50、120、230、400、690和1000V AC/DC的电平，可测量高达100KO的光导通测试 ，光导通测试是通过黄色的LED显示；相序测试的值会通绿色LED显示出来；相位测试的值会通过红色LED显示出来，测量点照明是白色 的LED灯；极性测试值也会通过其他色的LED显示；通过按钮切换负载 IS=550mA (1000 V)，30mA RCCB跳闸。
DUSPOL-EXPERT1000电压测试仪使用说明书
电压测试
相序测试
相位测试
极性检查
电缆断裂探测器
连续性测试（仅限DUSPOL expert 1000和digital 1000）
通过振动电机连接负载：用于抑制无功电压、用于电容器放电、用于触发10/30 mA RCCB
振动警报：带有不平衡信号的集成电机在负载测试期间通过在测试仪手柄中产生振动来激活
测量点照明（仅限DUSPOL expert 1000和digital 1000）
坚固的外壳设计，橡胶手柄表面
防护等级：IP65
文章来源于GMC-I 测试仪器
DUSPOL-EXPERT1000选型说明
DUSPOL ANALOG 1000 货号M611D 电压测试仪12...1000伏交流/直流
DUSPOL EXPERT 1000 货号M611E 电压和连续性测试仪12...1000伏交流/直流
DUSPOL DIGITAL 100 货号M611F 电压和连续性测试仪1...1000V交流真有效值/1200V直流
DUSPOL保护套 货号Z611T 带皮带夹和尼龙搭扣
DUSPOL-EXPERT1000电压测试仪操作说明书
| DUSPOL ANALOG 1000 | DUSPOL EXPERT 1000 | DUSPOL DIGITAL 1000 | |
| Nominal voltage range |
LED: 12 ... 1000 V AC/DC additional moving coil level indicator during testing under load |
LED: 12 ... 1000 V AC/DC |
LCD: 6 ... 1000 V AC TRUE RMS / 1200 V DC Low voltage range: 1.0 ... 11.9 V AC |
| Nominal frequency range | 0 ... 60 Hz | 0 ... 500 Hz | 0 ... 1000 Hz |
| Resolution | 0.1 V to 198.9 V / 1 V as from 199 V | ||
| Voltage measurement accuracy | Un ±15% (max. display error) | Un ±15% (max. display error) | ±3% rdg. + 5 digits |
| Display stages | LED: 12/24/50/120/230/400/690/1000 V AC/DC | LED: 12/24/50/120/230/400/690/ 1000 V AC/DC | LED: 50/120/230/400 V AC/DC |
| Continuity test | yellow LED + buzzer: optical 0 ... 100 kΩ | yellow LED + buzzer: optical 0 ... 100 kΩ | |
| Cable fracture detector | yellow LED blinks/fades out | yellow LED blinks/fades out | |
| Resistance measurement | LCD: 0.1 kΩ ... 300 kΩ | ||
| Resistance measurement accuracy | ±10% rdg. + 5 digits | ||
| Diode test | LCD: 0.3 V ... 2 V | ||
| Phase sequence test | LED (³ Un 230 V 50/60 Hz) | green LED (³ Un 230 V 50/60 Hz) | green LED (³ Un 230 V 50/60 Hz) |
| Frequency measurement | 15 Hz ... 1,000 Hz | ||
| Frequency meas. accuracy | ±2.5% rdg. + 1 digit | ||
| Phase (conductor) test | LED (³ Un 230 V 50/60 Hz) | red LED (³ Un 230 V 50/60 Hz) | red LED (³ Un 230 V 50/60 Hz) |
| Polarity check | LED: + / – | LED: + / – | LCD: + / – |
| Direct display without pressing a pushbutton | high-impedance test | high-impedance test | high-impedance test |
| Load connection via pushbutton |
low-voltage test (connection of vibration motor) |
low-voltage test (connection of vibration motor) |
low-voltage test (connection of vibration motor) |
| Deliberate triggering of RCCB | Testing of phase conductor (phase) towards PE (earth) | Testing of phase conductor (phase) towards PE (earth) | Testing of phase conductor (phase) towards PE (earth) |
| Illumination | Measuring point | Measuring point and display | |
| Internal resistance of measuring circuit | 180 kΩ | 175 kΩ | 175 kΩ |
| Maximum permissible on-time | 30 s, followed by 600 s inactivity | 30 s, followed by 240 s inactivity | 30 s, followed by 240 s inactivity |
| Power supply | no batteries necessary | 2 x 1.5 V micro, LR03/ AAA | 2 x 1.5 V micro, LR03/ AAA |
