H-1飞机大气数据测试仪适配器
H-1飞机大气数据测试仪适配器：
Part No. P22201-4 (1 req’d.)
This unit fits the pitot probe located on the nose.
Pre-Test Probe
Part No. PT11882 (1 req’d.)
When it becomes necessary to test the integrity of the pitot test adaptor and/or hoses and test set, this unit is installed onto the pitot adaptor thus simulating the pitot head.
Static Test Adaptor
Part No. S78425-6 (2 req’d.)
These units fit the static vents located on the side of the helicopter. The protective caps also act as pre-test adaptors and also serve to convert a test adaptor to a blanking adaptor.
Important: “Flight Safety” For proper handling and application of this unit, please refer to “Instructions For Use” on page 3.
Pitot Test Hose Assembly
Part No. BH1-7270 (1 req’d.)
One end of this hose assembly attaches to the pitot inlet of the adaptor and the other to the pitot outlet of the pneumatic generator.
Static Test Hose Assembly
Part No. BH1-5160 (1 req’d.)
One end of this assembly attaches to the static test adaptor and the other to the static outlet hose of the pneumatic generator.
Lubricating Fluid
Part No. LF5050 (1 req'd.)
This fluid is used to lubricate the glands of the pitot test adaptor. It is recommended that a small amount be placed on the glands before installing the adaptor on pitot probe.
Seal Kit - Part No. SK201
One set of spare seals for the pitot test adaptor is supplied with each kit.
Manual - Part No. 444-BH1-612
One manual is supplied with each kit. The equipment is enclosed in an aluminium case assembly Model No. 103XD-BH1
如您需要H-1飞机/大气数据测试仪适配器Pitot Test Adaptor (皮托管测试适配器)P22201-4，或是Pitot Pre-Test & Assembly Integrity Fixture( Pitot预测试和装配完整性夹具)PT11882，或是Lubricating Fluid(润滑液)LF5050,请联系我们。
| Aircraft Type | Pitot Test Adaptor | Pitot Probe Part No. | Static Test Adaptor Blanking Adaptor | Miscellaneous Adaptor | Pitot Pre-Test & Assembly Integrity Fixture | Air Data Accessories Kit |
|---|---|---|---|---|---|---|
| H-1 | P22201-4 | AN5813-1 | S78425-4 | PT11882 | ADABH1-612 |
| Aircraft | H-1 |
|---|---|
| Air Data Accessories Kit | ADABH1-612 |
| Category | Other Helicopter |
| Lubricating Fluid | LF5050 |
| Pitot Pre-Test & Assembly Integrity Fixture | PT11882 |
| Pitot Test Adaptor | P22201-4 |
| Seal and Spacer Kit | SSK201 |
| Seal Kit | SK201 |
| Static Test Adaptor / Blanking Adaptor | S78425-4 |
| 飞机 | H-1 |
|---|---|
| Air Data 附件套件 | ADABH1-612 |
| 类别 | 其他直升机 |
| 润滑液 | LF5050系列 |
| Pitot预测试和装配完整性夹具 | PT11882 |
| 皮托管测试适配器 | 件号P22201-4 |
| 密封件和垫片套件 | SSK201型 |
| 密封套件 | SK201系列 |
| 静态测试适配器 / 消隐适配器 | S78425-4系列 |
AIR DATA ACCESSORIES KIT MODEL No. ADABH1-612 NSN: 4920-20-002-3478 H-1 HELICOPTER
This kit contains all the equipment required to test from source the complete pitot & static air data system on the H-1 helicopter, as well as the means of pre-testing all adaptors and hoses prior to being fitted to the helicopter.
Part No. P22201-4 (1 req’d.)
This unit fits the pitot probe located on the nose.
Pre-Test Probe
Part No. PT11882 (1 req’d.)
When it becomes necessary to test the integrity of the pitot test adaptor and/or hoses and test set, this unit is installed onto the pitot adaptor thus simulating the pitot head.
Static Test Adaptor
Part No. S78425-6 (2 req’d.)
These units fit the static vents located on the side of the helicopter. The protective caps also act as pre-test adaptors and also serve to convert a test adaptor to a blanking adaptor.
Important: “Flight Safety” For proper handling and application of this unit, please refer to “Instructions For Use” on page 3.
Pitot Test Hose Assembly
Part No. BH1-7270 (1 req’d.)
One end of this hose assembly attaches to the pitot inlet of the adaptor and the other to the pitot outlet of the pneumatic generator.
Static Test Hose Assembly
Part No. BH1-5160 (1 req’d.)
One end of this assembly attaches to the static test adaptor and the other to the static outlet hose of the pneumatic generator.
Lubricating Fluid
Part No. LF5050 (1 req'd.)
This fluid is used to lubricate the glands of the pitot test adaptor. It is recommended that a small amount be placed on the glands before installing the adaptor on pitot probe.
Seal Kit - Part No. SK201
One set of spare seals for the pitot test adaptor is supplied with each kit.
Manual - Part No. 444-BH1-612
One manual is supplied with each kit. The equipment is enclosed in an aluminium case assembly Model No. 103XD-BH1
