Bell-214飞机皮托管测试适配器
皮托管测试适配器是用于连接大气数据测试仪软管与飞机皮托管和静压口的设备，它确保在测试过程中连接无泄漏，从而验证皮托管、软管及大气数据系统的完整性。适配器有多种类型和配置，适用于不同型号的飞机。安装和拆卸适配器通常简单易行，无需特殊工具，且适配器设计有自我测试功能，确保测试的准确性和安全性。
AIR DATA ACCESSORIES KIT MODEL No. ADA214ST-612 BELL 214 HELICOPTER - Proprietary Information -
The kit contains the equipment required to test from source the complete pitot & static air data system on the Bell 214 helicopter, as well as the means of pre- testing all adaptors and hoses prior to being fitted to the helicopter.
Pitot Test Adaptor
Part No. P22201-3 (3 req’d.)
This unit fits the pitot probe located on the nose, and when installed they will isolate and test each system separately or simultaneously.
Pre-Test Probe
Part No. PT11882 (3 req’d.)
When it becomes necessary to test the integrity of the pitot test adaptor and/or hose and test set, this unit is installed into the pitot test adaptor thus simulating the pitot head.
Static Test Adaptor
Part No. 33455M-70-4H (3 req'd.)
This unit fit the static vents located on each side of the helicopter. The Blanking Caps also act as pre-test units.
Static Blanking Adaptor
Part No. 33433M1-70 (3 req'd.)
These units are used to blank off the static vents on the opposite side of the helicopter, thus completely closing off the system.
Pitot Test Hose Assembly
Part No. 214ST-7270 (1 req’d.)
This hose is connected to the pitot inlet of the adaptors and is fitted with double acting quick disconnects for use when it is desirable to test only one pitot system. The connection for the pitot outlet of the pneumatic generator is included in this assembly.
Static Test Hose Assembly
Part No. 214ST-5160 (1 req’d.)
This assembly attaches to the static adaptors. The double acting quick disconnects operate in the same manner as that on the pitot test hose assembly. The connection for the static outlet of the pneumatic generator is included in this assembly.
Vacu-Grip Assembly
Part No. 421-4900 (1 req’d.)
This unit is supplied with the kit to provide a means of support for the static adaptors.
Seal Kit - Part No. SK201 (3 req’d.)
Three sets of spare seals for pitot test adaptor are stowed in the case.
Seal - Part No. 455-7M (3 req’d.)
Three spare seals for static test adaptor are stowed in the case.
Seal - Part No. 433M1-70-7 (3 req’d.)
Three spare seals for static test adaptor are stowed in the case.
Manual - Part No. 444-214ST
One manual is supplied with each kit.The equipment is enclosed in a case assembly.每个套件都提供一本手册。该设备封装在外壳组件中。
欢迎与我们小编进行备品备件工具技术交流。
| Aircraft Type | Pitot Test Adaptor | Pitot Probe Part No. | Static Test Adaptor Blanking Adaptor | Miscellaneous Adaptor | Pitot Pre-Test & Assembly Integrity Fixture | Air Data Accessories Kit |
|---|---|---|---|---|---|---|
| Bell 214 | P22201-4 | PH500 |
33455M-70-4 33433M1-70* |
PT11882 | ADA214ST-612 |
| Aircraft | Bell 214 |
|---|---|
| Air Data Accessories Kit | ADA214ST-612 |
| Category | Other Helicopter |
| Lubricating Fluid | LF5050 |
| Pitot Pre-Test & Assembly Integrity Fixture | PT11882 |
| Pitot Test Adaptor | P22201-4 |
| Seal and Spacer Kit | SSK201 |
| Seal Kit | SK201 |
| Static Test Adaptor / Blanking Adaptor |
33455M-70-4 33433M1-70* |
| 飞机 | Bell 214 |
|---|---|
| Air Data 附件套件 | ADA214ST-612 |
| 类别 | 其他直升机 |
| 润滑液 | LF5050系列 |
| Pitot预测试和装配完整性夹具 | PT11882 |
| 皮托管测试适配器 | 件号P22201-4 |
| 密封件和垫片套件 | SSK201型 |
| 密封套件 | SK201系列 |
| 静态测试适配器 / 消隐适配器 |
33455M-70-4 33433M1-70* |
AIR DATA ACCESSORIES KIT MODEL No. ADA214ST-612 BELL 214 HELICOPTER - Proprietary Information -
The kit contains the equipment required to test from source the complete pitot & static air data system on the Bell 214 helicopter, as well as the means of pre- testing all adaptors and hoses prior to being fitted to the helicopter.
Pitot Test Adaptor
Part No. P22201-3 (3 req’d.)
This unit fits the pitot probe located on the nose, and when installed they will isolate and test each system separately or simultaneously.
Pre-Test Probe
Part No. PT11882 (3 req’d.)
When it becomes necessary to test the integrity of the pitot test adaptor and/or hose and test set, this unit is installed into the pitot test adaptor thus simulating the pitot head.
Static Test Adaptor
Part No. 33455M-70-4H (3 req'd.)
This unit fit the static vents located on each side of the helicopter. The Blanking Caps also act as pre-test units.
Static Blanking Adaptor
Part No. 33433M1-70 (3 req'd.)
These units are used to blank off the static vents on the opposite side of the helicopter, thus completely closing off the system.
Pitot Test Hose Assembly
Part No. 214ST-7270 (1 req’d.)
This hose is connected to the pitot inlet of the adaptors and is fitted with double acting quick disconnects for use when it is desirable to test only one pitot system. The connection for the pitot outlet of the pneumatic generator is included in this assembly.
Static Test Hose Assembly
Part No. 214ST-5160 (1 req’d.)
This assembly attaches to the static adaptors. The double acting quick disconnects operate in the same manner as that on the pitot test hose assembly. The connection for the static outlet of the pneumatic generator is included in this assembly.
Vacu-Grip Assembly
Part No. 421-4900 (1 req’d.)
This unit is supplied with the kit to provide a means of support for the static adaptors.
Seal Kit - Part No. SK201 (3 req’d.)
Three sets of spare seals for pitot test adaptor are stowed in the case.
Seal - Part No. 455-7M (3 req’d.)
Three spare seals for static test adaptor are stowed in the case.
Seal - Part No. 433M1-70-7 (3 req’d.)
Three spare seals for static test adaptor are stowed in the case.
Manual - Part No. 444-214ST
One manual is supplied with each kit.The equipment is enclosed in a case assembly.每个套件都提供一本手册。该设备封装在外壳组件中。
欢迎与我们小编进行备品备件工具技术交流。
