Bell212Civil飞机皮托管测试适配器
皮托管测试适配器是用于连接大气数据测试仪与飞机皮托管和静压口的设备，它确保在测试过程中连接无泄漏，从而验证皮托管、软管及大气数据系统的完整性。适配器有多种类型和配置，适用于不同型号的飞机。安装和拆卸适配器通常简单易行，无需特殊工具，且适配器设计有自我测试功能，确保测试的准确性和安全性。
| Aircraft Type | Pitot Test Adaptor | Pitot Probe Part No. | Static Test Adaptor Blanking Adaptor | Miscellaneous Adaptor | Pitot Pre-Test & Assembly Integrity Fixture | Air Data Accessories Kit |
|---|---|---|---|---|---|---|
| Bell 212 Civil | P22201-4 |
PH500 AN5813 |
33410S-70-4 33410S-70B* |
PT11882 | ADAB212-612 |
| Aircraft | Bell 212 Civil |
|---|---|
| Air Data Accessories Kit | ADAB212-612 |
| Category | Other Helicopter |
| Lubricating Fluid | LF5050 |
| Pitot Pre-Test & Assembly Integrity Fixture | PT11882 |
| Pitot Test Adaptor | P22201-4 |
| Seal and Spacer Kit | SSK201 |
| Seal Kit | SK201 |
| Static Test Adaptor / Blanking Adaptor |
33410S-70-4 33410S-70B* |
| 飞机 | Bell 212 Civil |
|---|---|
| Air Data 附件套件 | ADAB212-612 |
| 类别 | 其他直升机 |
| 润滑液 | LF5050系列 |
| Pitot预测试和装配完整性夹具 | PT11882 |
| 皮托管测试适配器 | 件号P22201-4 |
| 密封件和垫片套件 | SSK201型 |
| 密封套件 | SK201系列 |
| 静态测试适配器 / 消隐适配器 |
33410S-70-4 33410S-70B* |
AIR DATA ACCESSORIES KIT MODEL No. ADAB212-612 BELL 212 HELICOPTER - Proprietary Information -
The kit contains all the equipment required to test from source the complete pitot and static air data system on the Bell 212 helicopter, as well as the means of pre-testing all adaptors and hoses prior to being fitted to the aircraft.
Pitot Test Adaptor
Part No. P22201-4 (1 req'd.)
These units fit the pitot probe located on the nose of the helicopter.
Pre-Test Probe
Part No. PT11882 (1 req'd.)
When this unit is inserted into the pitot test adaptors and the extension hose is connected from the pneumatic generator, the complete system, tester, hoses and adaptors can be tested before fitting to the aircraft.
Pitot Test Hose Assembly
Part No. 206-7270 (1 req'd.)
This hose is connected to the pitot inlet of the adaptor and the air data tester.
Static Test Hose Assembly
Part No. 206-5160 (1 req'd.)
This assembly attaches to the static test adaptor and connects to the static outlet of the air data tester.
Static Test Adaptor
Part No. 33410S-70-4 (1 req'd.)
This unit fit the static vents located on the side of the helicopter. The protective caps also act as pre-test adaptors.
Static Test Adaptor
Part No. 33410S-70B (1 req'd.)
This unit is used to blank off the static vent located on the opposite side of the helicopter thus completely closing off the system.
Seal Kit - Part No. SK201 (1 req'd.)
One set of spare seals for pitot test adaptor is supplied with each kit.
Seal - Part No. 410S-7 (2 req'd.)
Two spare seals for static test and static blanking adaptors are supplied with the kit.
Manual - Part No. 444-212
One manual is supplied with each kit.
This equipment is enclosed in a case assembly.
如您需要Bell212Civil飞机皮托管测试适配器Pitot Test Adaptor (皮托管测试适配器)P22201-4，或是Pitot Pre-Test & Assembly Integrity Fixture( Pitot预测试和装配完整性夹具)PT11882，或是Lubricating Fluid(润滑液0 LF5050，联系我们吧。
