Bell206 Jet Ranger飞机大气数据测试仪适配器
Bell 206 Jet Ranger飞机大气数据测试仪适配器
Pitot Test Adaptor
Part No. P22201-4 (1 req’d.)
This unit fits the pitot probe located on the nose of the helicopter.
Pre-Test Probe
Part No. PT11882 (1 req’d.)
When it becomes necessary to test the integrity of the pitot test adaptor and/or hose and test set, this unit is installed into the pitot test adaptor thus simulating the pitot head.
Static Test Adaptor
Part No. 33410S-70-4 (1 req'd.)
This unit fit the static vents located on each side of the helicopter. The Blanking Caps also act as pre-test adaptors.
Static Blanking Adaptor
Part No. 33410S-70B (1 req'd.)
This unit is used to blank off the static vent on the opposite side of the helicopter thus completely closing off the system.
Pitot Test Hose Assembly
Part No. 206-7270 (1 req’d.)
This hose is connected to the pitot inlet of the adaptor and to the pitot outlet of air data test set.
Static Test Hose Assembly
Part No. 206-5160 (1 req’d.)
This assembly attaches to the static adaptor and connects to the static outlet of the air data test set.
Seal Kit - Part No. SK201 (1 req’d.)
One set of spare seals for pitot test adaptor are stowed in the case.
Seal - Part No. 410S-7 (2 req’d.)
Two spare seals for static test and static blanking adaptor are stowed in the case.
Manual - Part No. 444-206
One manual is supplied with each kit.
The equipment is enclosed in a case assembly.深圳银飞公司有售Bell206 Jet Ranger飞机大气数据测试仪适配器
Aircraft Type | Pitot Test Adaptor | Pitot Probe Part No. | Static Test Adaptor Blanking Adaptor | Miscellaneous Adaptor | Pitot Pre-Test & Assembly Integrity Fixture | Air Data Accessories Kit |
---|---|---|---|---|---|---|
Bell 206 Jet Ranger | P22201-4 | PH500 |
33410S-70-4 33410S-70B* |
PT11882 | ADA206-612 |
Aircraft | Bell 206 Jet Ranger |
---|---|
Air Data Accessories Kit | ADA206-612 |
Category | Other Helicopter |
Lubricating Fluid | LF5050 |
Pitot Pre-Test & Assembly Integrity Fixture | PT11882 |
Pitot Test Adaptor | P22201-4 |
Seal and Spacer Kit | SSK201 |
Seal Kit | SK201 |
Static Test Adaptor / Blanking Adaptor |
33410S-70-4 33410S-70B* |
飞机 | Bell 206 Jet Ranger |
---|---|
Air Data 附件套件 | ADA206-612 |
类别 | 其他直升机 |
润滑液 | LF5050系列 |
Pitot预测试和装配完整性夹具 | PT11882 |
皮托管测试适配器 | 件号P22201-4 |
密封件和垫片套件 | SSK201型 |
密封套件 | SK201系列 |
静态测试适配器 / 消隐适配器 |
33410S-70-4 33410S-70B* |
AIR DATA ACCESSORIES KIT MODEL No. ADA206-612 BELL 206 HELICOPTER - Proprietary Information -
The kit contains the equipment required to test from source the complete pitot & static air data system on the Bell 206 helicopter, as well as the means of pre- testing all adaptors and hoses prior to being fitted to the helicopter.Pitot Test Adaptor
Part No. P22201-4 (1 req’d.)
This unit fits the pitot probe located on the nose of the helicopter.
Pre-Test Probe
Part No. PT11882 (1 req’d.)
When it becomes necessary to test the integrity of the pitot test adaptor and/or hose and test set, this unit is installed into the pitot test adaptor thus simulating the pitot head.
Static Test Adaptor
Part No. 33410S-70-4 (1 req'd.)
This unit fit the static vents located on each side of the helicopter. The Blanking Caps also act as pre-test adaptors.
Static Blanking Adaptor
Part No. 33410S-70B (1 req'd.)
This unit is used to blank off the static vent on the opposite side of the helicopter thus completely closing off the system.
Pitot Test Hose Assembly
Part No. 206-7270 (1 req’d.)
This hose is connected to the pitot inlet of the adaptor and to the pitot outlet of air data test set.
Static Test Hose Assembly
Part No. 206-5160 (1 req’d.)
This assembly attaches to the static adaptor and connects to the static outlet of the air data test set.
Seal Kit - Part No. SK201 (1 req’d.)
One set of spare seals for pitot test adaptor are stowed in the case.
Seal - Part No. 410S-7 (2 req’d.)
Two spare seals for static test and static blanking adaptor are stowed in the case.
Manual - Part No. 444-206
One manual is supplied with each kit.
The equipment is enclosed in a case assembly.深圳银飞公司有售Bell206 Jet Ranger飞机大气数据测试仪适配器