AS350/AS355系列飞机大气数据测试仪适配器
| Aircraft Type | Pitot Test Adaptor | Pitot Probe Part No. | Static Test Adaptor Blanking Adaptor | Miscellaneous Adaptor | Pitot Pre-Test & Assembly Integrity Fixture | Air Data Accessories Kit |
|---|---|---|---|---|---|---|
| AS350/355 Civil | P35055-4 | 39500 |
21298-150-4 21298B-150* |
PT13505 | ADA350-5-612 |
| Aircraft | AS350 / 355 Civil |
|---|---|
| Air Data Accessories Kit | ADA350-5-612 |
| Category | Airbus Helicopter |
| Lubricating Fluid | LF5050 |
| Pitot Pre-Test & Assembly Integrity Fixture | PT13505 |
| Pitot Test Adaptor | P35055-4 |
| Seal and Spacer Kit | SSK055 |
| Seal Kit | SK055 |
| Static Test Adaptor / Blanking Adaptor |
21298-150-4 21298B-150* |
This kit contains all the equipment
required to test from source the complete pitot & static air data system on the AS350/355 helicopters, as well as the means of pre-testing all adaptors and hoses prior to
being fitted to the aircraft.
Pitot Test Adaptor
Part No. P35055-4 (2 req’d.)
These units fit the pitot probe and when installed will isolate each system separately or simultaneously.
Pre-Test Probe
Part No. PT13505 (1 req’d.)
This probe is for use when it is necessary to check the integrity of the pitot test adaptors. This unit is installed thus simulating the pitot probe.
Static Test Adaptor
Part No. 21298-150-4 (2 req’d.)
These units fit the static vents located on the nose of the helicopter. The protective caps also act as pre-test adaptors.
Static Blanking Adaptor
Part No. 21298B-150 (2 req’d.)
These units are used in conjunction with the above-mentioned static test adaptors and are used to blank off the matching static vent on the opposite side of the helicopter.
Pitot Test Hose Assembly
Part No. AS350-7270 (1 req’d.)
This hose is connected to the pitot inlet of the adaptor and is fitted with double acting quick disconnects for use when it is desirable to test only one pitot system. The extension hose to the pneumatic generator is included on this assembly.
Static Test Hose Assembly
Part No. AS350-5160 (1 req’d.)
This assembly attaches to the static fittings. The double acting quick disconnects operate in the same manner as that on the pitot test hose assembly. The extension hose to the pneumatic generator is included on this assembly.
Seal Kit - Part No. SK055 (2 req’d.)
Two sets of spare seals for pitot test adaptors are stowed in the case.
Seal - Part No. 298150-7 (4 req’d.)
Four seals for static test adaptors & static blanking adaptors are stowed in the case.
Manual - Part No. 444-AS350/355
One manual is supplied with each kit.
The equipment is enclosed in a case assembly.
NAV-AIDS公司自1960年代以来，专门为各种飞机提供空速管适配器和皮托管夹具，以及大气数据测试仪附件和套件。NAV-AIDS公司的主要产品包括空速管测试适配器和皮托管夹具，这些产品可以作为独立项目或飞机专用套件提供，包含所需的空速管和皮托管适配器、软管组件、预测试工具、控制台、备用密封件、润滑液、软管悬挂装置等。NAV-AIDS公司通过了ISO 9001:2015认证，确保其产品质量和服务的可靠性。
required to test from source the complete pitot & static air data system on the AS350/355 helicopters, as well as the means of pre-testing all adaptors and hoses prior to
being fitted to the aircraft.
Pitot Test Adaptor
Part No. P35055-4 (2 req’d.)
These units fit the pitot probe and when installed will isolate each system separately or simultaneously.
Pre-Test Probe
Part No. PT13505 (1 req’d.)
This probe is for use when it is necessary to check the integrity of the pitot test adaptors. This unit is installed thus simulating the pitot probe.
Static Test Adaptor
Part No. 21298-150-4 (2 req’d.)
These units fit the static vents located on the nose of the helicopter. The protective caps also act as pre-test adaptors.
Static Blanking Adaptor
Part No. 21298B-150 (2 req’d.)
These units are used in conjunction with the above-mentioned static test adaptors and are used to blank off the matching static vent on the opposite side of the helicopter.
Pitot Test Hose Assembly
Part No. AS350-7270 (1 req’d.)
This hose is connected to the pitot inlet of the adaptor and is fitted with double acting quick disconnects for use when it is desirable to test only one pitot system. The extension hose to the pneumatic generator is included on this assembly.
Static Test Hose Assembly
Part No. AS350-5160 (1 req’d.)
This assembly attaches to the static fittings. The double acting quick disconnects operate in the same manner as that on the pitot test hose assembly. The extension hose to the pneumatic generator is included on this assembly.
Seal Kit - Part No. SK055 (2 req’d.)
Two sets of spare seals for pitot test adaptors are stowed in the case.
Seal - Part No. 298150-7 (4 req’d.)
Four seals for static test adaptors & static blanking adaptors are stowed in the case.
Manual - Part No. 444-AS350/355
One manual is supplied with each kit.
The equipment is enclosed in a case assembly.
