Agusta 109E皮托管测试适配器
皮托管测试适配器是用于连接大气数据测试仪与飞机皮托管和静压口的设备，它确保在测试过程中连接无泄漏，从而验证皮托管、软管及大气数据系统的完整性。适配器有多种类型和配置，适用于不同型号的飞机。安装和拆卸适配器通常简单易行，无需特殊工具，且适配器设计有自我测试功能，确保测试的准确性和安全性。
AIR DATA ACCESSORIES KIT MODEL No. ADA109C-612 NSN: 4920-20-005-7195 AGUSTA 109C HELICOPTER
The kit contains the equipment required to test from source the complete pitot & static air data system on the Agusta 109C helicopter, as well as the means of pre-testing all adaptors and hoses prior to being fitted to the aircraft.
Pitot Static Test Adaptor
Part No. PS44129-4-6 (2 req’d.)
These units fit the pitot static probes 850L 8&9 located on the nose and when installed they will isolate and test each system separately or simultaneously.
Pre-Test Probe
Part No. PT14412 (1 req’d.)
When this unit is inserted into the adaptor and the extension hose is connected from the pneumatic generator, the complete system, tester, hoses and adaptors can be tested before fitting to the aircraft.
Pitot Test Hose Assembly
Part No. 109-7270 (1 req’d.)
This hose is connected to each pitot inlet of the adaptors and is fitted with double acting quick disconnects for use when it is desirable to test only one pitot system. The extension hose to the pneumatic generator is included on this assembly.
Static Test Hose Assembly
Part No. 109-5160 (1 req’d.)
This assembly attaches to the static fittings. The double acting quick disconnects operate in the same manner as that on the pitot test hose assembly. The extension hose to the pneumatic generator is included on this assembly.
Lubricating Fluid
Part No. LF5050
This fluid is used to lubricate the glands of the pitot static test adaptors. It is recommended that a small amount be placed on the glands before installing adaptor on pitot head. This will ensure smooth installation onto the pitot probe.
Seal Kit - Part No. SK129
Two sets of spare seals are stowed in the case.
Manual - Part No. 444-109C
One manual is supplied with each kit. The equipment is enclosed in a case assembly - Model No. 106XD-109C.
我司有售皮托管测试适配器
| Aircraft Type | Pitot Test Adaptor | Pitot Probe Part No. | Static Test Adaptor Blanking Adaptor | Miscellaneous Adaptor | Pitot Pre-Test & Assembly Integrity Fixture | Air Data Accessories Kit |
|---|---|---|---|---|---|---|
| Agusta 109E | PS44129-4-6 | 0850L9 | PT14412 | ADA109C-612 |
| Aircraft | Agusta 109E |
|---|---|
| Air Data Accessories Kit | ADA109C-612 |
| Category | Other Helicopter |
| Lubricating Fluid | LF5050 |
| Pitot Pre-Test & Assembly Integrity Fixture | PT14412 |
| Pitot Test Adaptor | PS44129-4-6 |
| 飞机 | Agusta 109E |
|---|---|
| Air Data 附件套件 | ADA109C-612 |
| 类别 | 其他直升机 |
| 润滑液 | LF5050系列 |
| Pitot预测试和装配完整性夹具 | PT14412 |
| 皮托管测试适配器 | PS44129-4-6 |
AIR DATA ACCESSORIES KIT MODEL No. ADA109C-612 NSN: 4920-20-005-7195 AGUSTA 109C HELICOPTER
The kit contains the equipment required to test from source the complete pitot & static air data system on the Agusta 109C helicopter, as well as the means of pre-testing all adaptors and hoses prior to being fitted to the aircraft.
Pitot Static Test Adaptor
Part No. PS44129-4-6 (2 req’d.)
These units fit the pitot static probes 850L 8&9 located on the nose and when installed they will isolate and test each system separately or simultaneously.
Pre-Test Probe
Part No. PT14412 (1 req’d.)
When this unit is inserted into the adaptor and the extension hose is connected from the pneumatic generator, the complete system, tester, hoses and adaptors can be tested before fitting to the aircraft.
Pitot Test Hose Assembly
Part No. 109-7270 (1 req’d.)
This hose is connected to each pitot inlet of the adaptors and is fitted with double acting quick disconnects for use when it is desirable to test only one pitot system. The extension hose to the pneumatic generator is included on this assembly.
Static Test Hose Assembly
Part No. 109-5160 (1 req’d.)
This assembly attaches to the static fittings. The double acting quick disconnects operate in the same manner as that on the pitot test hose assembly. The extension hose to the pneumatic generator is included on this assembly.
Lubricating Fluid
Part No. LF5050
This fluid is used to lubricate the glands of the pitot static test adaptors. It is recommended that a small amount be placed on the glands before installing adaptor on pitot head. This will ensure smooth installation onto the pitot probe.
Seal Kit - Part No. SK129
Two sets of spare seals are stowed in the case.
Manual - Part No. 444-109C
One manual is supplied with each kit. The equipment is enclosed in a case assembly - Model No. 106XD-109C.
我司有售皮托管测试适配器
